Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the shark fin antenna on an Infiniti Q60.

Model: Infiniti Q60 MK 1 - Years 2017-2024
Part: Antenna

Let's see how to remove the shark fin antenna from the Infiniti Q60: we will need a flathead screwdriver, a 22mm socket wrench, and a cloth to protect the roof. The "fin" consists of two pieces: the front fixed part and the rear part that needs to be removed. Gently pry on the rear edge; there are 3 clips holding it in place, as shown in the video. Once they are released, pull upward and backward; disconnect the electrical connector, remove the 22mm nut located at the center of the antenna base, and then we can take it off (make sure there is no gasket). Now we will have a hole in the roof; let's cover it with tape, apply the wrap (we removed the antenna to wrap the vehicle), and then reattach the antenna. The Infiniti Q60 is a vehicle that is often wrapped, due to its aggressive lines that lend themselves to saturated colors, matte finishes, or special effects.

Posted on 27 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Infiniti Q60
How to Replace the Air Filter on the Infiniti Q60
Infiniti Q60 (2017-2024 / MK 1) If you haven't replaced the air filter in your Infiniti Q60 for a long time and want to carry out this operation safely and independently, carefully …
How to reset the oil change reminder on the Infiniti Q60
How to reset the oil change reminder on the Infiniti Q60
Infiniti Q60 (2017-2024 / MK 1) The information provided in this guide will show us how to reset the engine oil change warning light (service) on the Infiniti Q60. First, we get int…
How to Replace the Remote Battery on the Infiniti Q60?
How to Replace the Remote Battery on the Infiniti Q60?
Infiniti Q60 (2017-2024 / MK 1) In this tutorial, you will see how to replace the remote battery on the Infiniti Q60. For this simple and quick operation, you will need a small flat…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos