Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Infiniti
  4. :
  5. QX60
  6. : How to change the sun visor in the Infiniti Qx60?

Infiniti QX60 - Video tutorial

Model: Infiniti QX60 L50 - Years 2013-2020
Part: Accessory Kit
Operation: How to change the sun visor in the Infiniti Qx60?

The video explains how to replace the sun visor in the Infiniti Qx60. When purchasing this accessory we make sure to select the correct side on which we want to install it because the two are not interchangeable. Also, make sure that the color is identical to that of the already mounted parasol. Let's remove the cover of the two 7mm bolts that hold the sun visor and unscrew them with a suitable wrench, detach the sun visor and disconnect the connector. We take the new piece that we must now connect to the plug and reposition in place of the one just removed. Finally we tighten the bolts and cover them with their plastic panel.


Posted on 10 August 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos