Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Infiniti
    3. :
  3. QX60
    4. : How to replace the cabin filter in 2016 Infiniti QX60

Infiniti QX60 - Video tutorial

Model: Infiniti QX60 L50 - Years 2013-2020
Part: Cabin air filter
Operation: How to replace the cabin filter in 2016 Infiniti QX60

In this video it is possible to understand how to replace the cabin filter in the 2016 Infiniti QX60 car. First of all, in order to proceed it will be necessary to identify the location where it is located, in this case the area indicated to us is located under the glove box, which will have to be removed previously. As shown to us in the video, we will find the filter inside a black box, from which we will be able to proceed to extract it in a very simple way. In fact, the operation does not require special tools, it will be sufficient to unhook the lid of the box in which it is located and carefully extract it by hand. Subsequently, we will have to pay attention to the direction in which to insert the new filter, which obviously must be the same in which the now worn out filter was. Finally we will be able to proceed simply by closing the black box and reassembling the object holder.


Posted on 4 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos