Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Isuzu
    3. :
  3. Isuzu D Max
    4. : Fuse box

Isuzu Isuzu D Max - Fuse box

Isuzu Isuzu D Max (2011-2023 / Rt85, Rt50)
Placement of the fuse box of the Isuzu DMax
If an electrical user of the Isuzu D Max suddenly stops working, the cause may be the intervention, for protection, of its fuse. In order to carry out a check …read all…
Posted on 10 May 2024 by ScegliAuto
Isuzu Isuzu D Max (2011-2023 / Rt85, Rt50)
Schema and positioning of the fuses for the Isuzu D-Max.
Today we will see the fuse diagram and placement of the Isuzu D-Max, following the instructions provided below. First, let's locate the external fuse box; we …read all…
Posted on 30 October 2023 by ScegliAuto
Isuzu Isuzu D Max (2011-2023 / Rt85, Rt50)
Where is the fuse box located in the Isuzu D Max?
If you want to discover where all the various fuses are located in your Isuzu D Max, all you have to do is carefully read this new mini guide and follow the …read all…
Posted on 22 June 2023 by ScegliAuto
Airbags (1) Car stereo (2) Key (3) -board computer (4) Checks and maintenance (7) Air filter (1) Cabin air filter (1) Diesel filter (1) Brake pads (1) Window lift button (1) Instrument cluster (8) Fuse box (3) Transmission (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos