Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Isuzu
    3. :
  3. Isuzu D Max
    4. : Schema and positioning of the fuses for the Isuzu D-Max.

Isuzu Isuzu D Max - Video tutorial

Model: Isuzu Isuzu D Max Rt85, Rt50 - Years 2011-2023
Part: Fuse box
Operation: Schema and positioning of the fuses for the Isuzu D-Max.

Today we will see the fuse diagram and placement of the Isuzu D-Max, following the instructions provided below. First, let's locate the external fuse box; we can find it at the bottom of the engine compartment by removing the plastic cover, as shown in the video. Instead, we find the internal fuse box on the driver's side, by removing the plastic cover located under the steering wheel. Then, we use the owner's manual to find the diagram and fuse layout, which is useful for finding the code of each individual fuse needed for replacement.


Posted on 30 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Isuzu D Max 2011-2023 - Where is the fuse box located on the Isuzu D Max? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos