Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Isuzu Mu 7 - Key

Isuzu Mu 7 (2004-2013 / 510)
How to program the keys of the Isuzu MU7 with the OBDstar device.
If you have lost all the keys to your Isuzu Mu 7, you can reprogram the transponder using this OBD star device. There are many types of OBD Star programmers, …read all…
Posted on 1 July 2023 by ScegliAuto
Isuzu Mu 7 (2004-2013 / 510)
How to replace the battery key of the Isuzu Mu 7
If the key to your Isuzu Mu 7 suddenly stopped working, don't rush to buy a new one, but try to find out if it was just a worn out battery. Below we will find …read all…
Posted on 24 April 2024 by ScegliAuto
Bodywork (1) Key (2) Checks and maintenance (1) Cabin air filter (1) Engine oil (1) Steering rods (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos