Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Isuzu
    3. :
  3. Isuzu Mu 7
    4. : Steering rods

Isuzu Mu 7 - Steering rods

Isuzu Mu 7 (2004-2013 / 510)
How do you replace the steering tie rods on the Isuzu MU 7?
To replace the steering tie rods of the Isuzu MU 7, it will be necessary to lift the car using a lift and it will also be necessary to lock the steering, …read all…
Posted on 23 May 2023 by ScegliAuto
Bodywork (1) Key (2) Checks and maintenance (1) Cabin air filter (1) Engine oil (1) Steering rods (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos