Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Tie Rods on an Isuzu MU 7?

Model: Isuzu Mu 7 510 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tie rods

Video tutorial

To replace the steering tie rods on an Isuzu MU 7, lift the vehicle using a lift and secure the steering to prevent rotation. Once these steps are completed, remove the bolts securing the front wheels, take off the wheels, and access the inner covers of the wheel wells.

After removing these covers, you can access the steering tie rods, which can be removed by loosening the bolts at the axle and the steering column. After removing the old tie rods, install the new replacement parts and reassemble the removed components.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery Key in the Isuzu Mu 7
How to Replace the Battery Key in the Isuzu Mu 7
Isuzu Mu 7 (2004-2013 / 510) If the key for your Isuzu Mu 7 has suddenly stopped working, don't rush to buy a new one; first, check if it was just a dead battery. Below, we will …
How to Remove the ABS Sensor from the Isuzu MU 7
How to Remove the ABS Sensor from the Isuzu MU 7
Isuzu Mu 7 (2004-2013 / 510) In this guide, see the steps to disconnect and remove the ABS sensor from the Isuzu MU 7 by following the instructions below. First, raise the vehicl…
How to Equip an Isuzu MU 7 for Day Trips
How to Equip an Isuzu MU 7 for Day Trips
Isuzu Mu 7 (2004-2013 / 510) On this Isuzu MU 7, the YouTuber did a truly professional job, creating a drawer system with a fridge and a pull-out table made in an extraordinary w…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos