Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Tie Rod End on the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Tie rods

Today we will see how to independently replace the steering tie rod end on the Peugeot 2008 model 1. Turn off the car and pull the handbrake, then pull the bonnet release lever to open it. Lift the front of the vehicle and remove the front wheels. Spray some penetrating oil to facilitate the removal of the tie rod end nut. Using a 15 mm spanner, unscrew the nut supporting the tie rod end and make a mark with a brush between the rod and the end to facilitate reassembly. Remove the end from the pin and the counter-nut of the rod. Position the new counter-nut against the thread of the rod and mount the end, paying attention to the mark. Reinsert the end into its pin and mount the nut provided with the new part; press on the end and tighten it with a socket wrench with a 15 mm insert. After securing the end, lock the counter-nut with a spanner. Conclude the operation by mounting the front wheels and lowering the vehicle.

Posted on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter on a Peugeot 2008 MK1.
How to replace the air filter on a Peugeot 2008 MK1.
Peugeot 2008 (2013-2019 / MK 1) In this video, we will see how to replace the air filter on a Peugeot 2008 MK1: let's start by opening the front hood of the vehicle, and we can see …
How to Replace the Diesel Filter of the Peugeot 2008?
How to Replace the Diesel Filter of the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) To replace the diesel filter of the Peugeot 2008, open the bonnet to access the engine bay; then, using a flathead screwdriver, remove a rivet locate…
How to change the battery of the Peugeot 2008 key.
How to change the battery of the Peugeot 2008 key.
Peugeot 2008 (2019-2026 / MK 2) If you want to independently replace the battery inside the key of your second-generation Peugeot 2008, you must first carefully read all the steps d…

Other guides you may be interested in

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos