Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Headlight Bulbs on a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Want to replace the front headlight bulbs on a Peugeot 2008? Open the front bonnet using the lever located at the bottom right of the steering wheel, and secure it with the prop rod. Locate the round inspection cap of the headlight (located at the back of the headlight) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulbs (use a screwdriver or pliers if needed).

Fit the new bulbs (always the correct type and size) and insert the bulb holder back into the headlight housing.

Refit all the previously removed parts.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Change the Front Headlamp Bulbs on a Peugeot 2008
How to Change the Front Headlamp Bulbs on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Learn how to change the bulbs mounted in the front headlamp of a Peugeot 2008. Lift the bonnet (by pulling the lever located at the bottom right of t…
How to Replace the Front Headlamp Bulb on a Peugeot 2008
How to Replace the Front Headlamp Bulb on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) This brief guide outlines the steps to remove and replace the front headlamp bulb on a Peugeot 2008. First, open the bonnet of your car and start by …
How to replace the dipped beam bulb of the front headlight of the Peugeot 2008
How to replace the dipped beam bulb of the front headlight of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) These short and simple steps will show us the process of disassembling and replacing the dipped beam bulb of the front headlight of the Peugeot 2008.…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos