Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing Dynamic Indicator on Peugeot 2008 Wing Mirror

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Light bulb

You can replace the indicators on the external wing mirrors with LED lamps featuring a dynamic function: instead of flashing intermittently, the LED strip lights up in a scrolling mode. To carry out this installation, first, detach the internal mirror to access the snap-fit clips securing the cover, allowing you to remove the cover. Next, remove the original indicator, detach the lamp holder, extract the original bulb, and insert the LED indicator connector before proceeding in reverse for reassembly.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Mirror from the External Mirror on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To remove the mirror from the external mirror on a Peugeot 2008, use a plastic or rubber-coated lever to pry between the perimeter of the mirror fram…
How does the active blind spot monitor of the Peugeot 2008 work?
How does the active blind spot monitor of the Peugeot 2008 work?
Peugeot 2008 (2019-2026 / MK 2) The active blind spot monitor of the Peugeot 2008 activates automatically when the vehicle is turned on and is a system that allows to monitor the bl…
How Can I Replace the Mirror on My Peugeot 2008?
How Can I Replace the Mirror on My Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) Removing the external rear-view mirror from your Peugeot 2008 is easier than you think. The first step is to take off the mirror. To do this without …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos