Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Wing Mirror of the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Side mirror

The procedure for removing and replacing the external wing mirror is very simple; here’s how to do it on the Peugeot 2008. First, open the front door and begin to remove the door panel by unscrewing all the fixing screws found on the sides and under the plastic cover of the grab handle; then disconnect the electrical connector of the window switch, as shown in the video. At this point, disconnect the mirror connector and unscrew the fixing screws to remove it from the outside, replacing it with the new one!

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you close the external rearview mirror of the Peugeot 2008?
How do you close the external rearview mirror of the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) In order to close the external rearview mirror of the Peugeot 2008, you need to insert the ignition key into the corresponding slot: once the key is …
How to Remove the Mirror from the External Mirror on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To remove the mirror from the external mirror on a Peugeot 2008, use a plastic or rubber-coated lever to pry between the perimeter of the mirror fram…
How the Blind Spot Indicator Works on the Peugeot 2008
How the Blind Spot Indicator Works on the Peugeot 2008
Peugeot 2008 (2019-2026 / MK 2) In this video, we see how the blind spot indicator works in the external rear-view mirror of the Peugeot 2008: when the vehicle is started, the orang…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos