Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to remove the exterior mirror mirror on Peugeot 2008

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Outside rearview mirror
Operation: How to remove the exterior mirror mirror on Peugeot 2008

How to remove the exterior mirror mirror on Peugeot 2008. With a lever with a plastic or rubber coating, we go to pry between the perimeter of the mirror frame and the mirror glass of the same. Lever until the mirror comes off the mirror on one side (disconnect the power supply cable if with defroster); very delicate operation because the slide or the mirror itself could break. Unscrew the screws with a screwdriver to disconnect the mirror cover (if present), replace the damaged piece with the new one. We are careful to engage the plastic snap clips in the mirror supports.


Posted on 29 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2013-2019 - Why don't the electric rearview mirrors of the Peugeot 2008 open anymore? Read Answer
    • Peugeot 2008 2013-2019 - Why doesn't my Peugeot 2008 wing mirror open? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the mirrors of Peugeot 2008 do not open? Read Answer
    • Peugeot 2008 2013-2019 - Why don't the mirrors of the Peugeot 2008 open? Read Answer
    • Peugeot 2008 2019-2026 - What problems with the exterior mirror on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - What to do when the mirrors of the Peugeot 2008 do not open? Read Answer
    • Peugeot 2008 2013-2019 - Why does the automated mirror opening no longer work in the Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos