Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wing Mirror Cover on a Peugeot 2008?

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Side mirror

To replace the wing mirror cover on a Peugeot 2008, use a tool to pry off the cover from the outer part of the mirror, disengaging the internal clips. Once these are released and the cover is removed, you can also remove the side indicator lens by disconnecting its connector and pulling out the bulb inside; this will allow you to position and secure the new lens, inserting the bulb back in and installing the new cover on top.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the External Wing Mirror of the Peugeot 2008
Removing the External Wing Mirror of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this video tutorial, learn how to remove the front door panel and the external wing mirror of the Peugeot 2008. First, open the front door and sta…
How to Remove the External Wing Mirror of the Peugeot 2008
How to Remove the External Wing Mirror of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) The procedure for removing and replacing the external wing mirror is very simple; here’s how to do it on the Peugeot 2008. First, open the front door…
How do you close the external rearview mirror of the Peugeot 2008?
How do you close the external rearview mirror of the Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) In order to close the external rearview mirror of the Peugeot 2008, you need to insert the ignition key into the corresponding slot: once the key is …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos