Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Headlamp Bulbs on a Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Headlight bulb

Learn how to change the bulbs mounted in the front headlamp of a Peugeot 2008. Lift the bonnet (by pulling the lever located at the bottom right of the dashboard) and secure it with the prop rod. Locate the plastic inspection cap and remove it if available (located at the rear of the headlamp). Extract the bulb holder from the front headlamp and disconnect the damaged bulb. Fit the new bulb (ensuring it is the correct type and size) and insert the bulb holder back into the headlamp housing. Finally, close the headlamp with the rubber inspection cap and test the bulbs for proper operation.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Front Headlight Bulbs on a Peugeot 2008
Replace the Front Headlight Bulbs on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Want to replace the front headlight bulbs on a Peugeot 2008? Open the front bonnet using the lever located at the bottom right of the steering wheel,…
How to change the headlight bulb of the Peugeot 2008
How to change the headlight bulb of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Through these brief instructions, we will see how to disassemble and replace the bulbs of the front headlight of the Peugeot 2008. First, open the ho…
How to Replace the Front Bulbs on a Peugeot 2008?
How to Replace the Front Bulbs on a Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) This video demonstrates how to replace the front headlight bulbs on a first-generation Peugeot 2008. First, secure the vehicle, ensuring the engine i…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos