Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the headlight bulb of the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Headlight bulb

Through these brief instructions, we will see how to disassemble and replace the bulbs of the front headlight of the Peugeot 2008. First, open the hood of the car and start by removing the bulb protection cap; then disconnect the electrical connector of the light and release the metal clip to remove the bulb from the headlight assembly, as shown in the video. At this point, replace the bulb with a new one of the correct type and with the same fitting (in this case, H7 type); make the connection and securely fasten the bulb, adjusting the height if necessary.

Posted on 25 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Headlamp Bulbs on a Peugeot 2008
How to Change the Front Headlamp Bulbs on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Learn how to change the bulbs mounted in the front headlamp of a Peugeot 2008. Lift the bonnet (by pulling the lever located at the bottom right of t…
How to change the front headlight bulb of the Peugeot 2008
How to change the front headlight bulb of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this new guide, we will explain the steps you need to take if you want to replace the front headlight bulb of your first edition Peugeot 2008 on y…
How to replace the front pole light bulb of the Peugeot 2008
How to replace the front pole light bulb of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Today we will explain how to replace the front headlight bulbs of the Peugeot 2008. To replace the bulb of the right front headlight, we need to open…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos