Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 2008
  6. : How to replace the headlight bulb of the Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Light bulb
Operation: How to replace the headlight bulb of the Peugeot 2008?

In order to replace the Peugeot 2008 headlight bulb, you have to open the hood to access the engine compartment. Subsequently, it will be necessary to remove the cap that is located to protect the rear part of the headlight: by removing the cap it will be possible to have access to the connector connected to the bulb. By releasing the connector, the bulb can be extracted from its housing and removed. The new bulb can therefore be connected to the relative connector and inserted in its seat. At the end of the operation, it will be possible to insert the protective cap again.


Posted on 1 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos