Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the front headlight bulb of the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

In this new guide, we will explain the steps you need to take if you want to replace the front headlight bulb of your first edition Peugeot 2008 on your own. Before starting the actual procedure, make sure you have a new bulb that is perfectly compatible with the car. Then, lift the front hood and remove the rubber protective cap located behind the headlight, inside the engine compartment.

Next, disconnect the electrical cable from the bulb holder and remove it. Finally, replace the old bulb with the new one.


Posted on 21 February 2025 by ScegliAuto


Related tutorials

How to Change the Front Headlamp Bulbs on a Peugeot 2008
How to Change the Front Headlamp Bulbs on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Learn how to change the bulbs mounted in the front headlamp of a Peugeot 2008. Lift the bonnet (by pulling the lever located at the bottom right of t…
How to replace the front pole light bulb of the Peugeot 2008
How to replace the front pole light bulb of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Today we will explain how to replace the front headlight bulbs of the Peugeot 2008. To replace the bulb of the right front headlight, we need to open…
How to replace the dipped beam bulb of the front headlight of the Peugeot 2008
How to replace the dipped beam bulb of the front headlight of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) These short and simple steps will show us the process of disassembling and replacing the dipped beam bulb of the front headlight of the Peugeot 2008.…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos