Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the dipped beam bulb of the front headlight of the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

These short and simple steps will show us the process of disassembling and replacing the dipped beam bulb of the front headlight of the Peugeot 2008. First, we open the vehicle's hood and start removing the plastic cover protecting the bulbs; then we disconnect the electrical connector of the light, unhooking the metal clip to remove the dipped beam bulb from the headlight, as shown in the video.

Now we install the new bulb on the headlight assembly, inserting it in the correct direction, and finally reattach the plastic cover for protection!


Posted on 25 May 2025 by ScegliAuto


Related tutorials

How to Change the Front Headlamp Bulb on a Peugeot 2008
How to Change the Front Headlamp Bulb on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) These brief instructions will show you how to remove and replace the front headlamp bulbs on the Peugeot 2008. First, open the bonnet and start by re…
How to replace the front headlight bulb of the Peugeot 2008
How to replace the front headlight bulb of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this guide we will see the information related to the disassembly and replacement of the dipped beam bulb of the front headlight of the Peugeot 20…
How to Replace the Front Headlamp Bulb on the Peugeot 2008?
How to Replace the Front Headlamp Bulb on the Peugeot 2008?
Peugeot 2008 (2013-2019 / MK 1) To replace the front headlamp bulb on the Peugeot 2008, open the bonnet to access the components in the engine bay. You will find the internal protec…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos