Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Headlight bulb

In this guide we will see the information related to the disassembly and replacement of the dipped beam bulb of the front headlight of the Peugeot 2008. In this case, the replacement operation is carried out with the headlight already disassembled; so we remove the plastic cap protecting the bulbs and disconnect the electrical connector, as shown in the video. At this point, we release the metal clip to remove the dipped beam bulb; replace it with the new one, of the correct type (in this case with H7 fitting), reassembling and connecting the light. Finally, reassemble the headlight unit!

Posted on 22 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front pole light bulb of the Peugeot 2008
How to replace the front pole light bulb of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Today we will explain how to replace the front headlight bulbs of the Peugeot 2008. To replace the bulb of the right front headlight, we need to open…
How to change the front headlight bulb of the Peugeot 2008
How to change the front headlight bulb of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In this new guide, we will explain the steps you need to take if you want to replace the front headlight bulb of your first edition Peugeot 2008 on y…
How to Replace the Front Headlight Bulb on a Peugeot 2008?
How to Replace the Front Headlight Bulb on a Peugeot 2008?
Peugeot 2008 (2019-2026 / MK 2) Fortunately, replacing one of the front headlight bulbs on a Peugeot 2008 is not a complex task; in fact, it is quite easy and quick. All you need is…

Other guides you may be interested in

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos