Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 2008
  6. : How do you replace the front bulbs of the Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Light bulb
Operation: How do you replace the front bulbs of the Peugeot 2008?

The authors of this video show us how to replace the front headlight bulbs in a first-generation Peugeot 2008. First, we need to secure the car by turning off the engine and pulling the handbrake. Then, we proceed to pull the lever that unlocks the front hood to lift it and secure it as well. Now, we can remove the protective caps behind the headlight and disconnect the electrical connectors of the bulbs. We unscrew the burnt-out bulbs and remove them from their housing, then install the new ones and reposition the connectors and protective caps in their place.


Posted on 11 August 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos