Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light and Replace the Bulbs on Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

Are the rear light bulbs on your Peugeot 2008 not working anymore? Follow this guide to remove the light and replace the bulbs: open the boot lid, remove the plastic panel on the side of the trim (unscrew the plastic retaining bolt). Once the cover is unscrewed, remove the plastic retaining pins.

Disconnect the rear light from its housing and replace the damaged bulbs with new ones (same size and voltage). Finally, reassemble the light with the retaining pins and refit the plastic cover on the trim.

Test the correct operation of the previously fitted bulbs.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

Replace the Front Headlight Bulbs on a Peugeot 2008
Replace the Front Headlight Bulbs on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Want to replace the front headlight bulbs on a Peugeot 2008? Open the front bonnet using the lever located at the bottom right of the steering wheel,…
How to Change the Front Headlamp Bulbs on a Peugeot 2008
How to Change the Front Headlamp Bulbs on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Learn how to change the bulbs mounted in the front headlamp of a Peugeot 2008. Lift the bonnet (by pulling the lever located at the bottom right of t…
How to Replace the Rear Exterior Headlamp Bulbs on the Peugeot 2008
How to Replace the Rear Exterior Headlamp Bulbs on the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) To replace the rear exterior headlamp on the Peugeot 2008, start by opening the boot. Remove the rear cover of the headlamp, unclip the internal clip…

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - How to disassemble the rear light of the Peugeot 2008? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos