Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Exterior Headlamp Bulbs on the Peugeot 2008

Model: Peugeot 2008 MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

To replace the rear exterior headlamp on the Peugeot 2008, start by opening the boot. Remove the rear cover of the headlamp, unclip the internal clip of the headlamp, and detach it from the body of the car. Once the headlamp is detached, disconnect the connector, unclip the tabs holding the bulb holder, and remove the bulb to be replaced by pressing and turning it anti-clockwise.

After removing the old bulb, take the new bulb, position it on the bulb holder, press it in, and turn it clockwise to secure it. Place the bulb holder back onto the headlamp and ensure the tabs clip in. Then, position the headlamp back onto the body and secure the internal clip, replace the rear cover of the headlamp, close the boot, and check the correct operation of the bulbs.


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Change the Front Headlamp Bulbs on a Peugeot 2008
How to Change the Front Headlamp Bulbs on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Learn how to change the bulbs mounted in the front headlamp of a Peugeot 2008. Lift the bonnet (by pulling the lever located at the bottom right of t…
How to Change the Front Headlamp Bulb on a Peugeot 2008
How to Change the Front Headlamp Bulb on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) These brief instructions will show you how to remove and replace the front headlamp bulbs on the Peugeot 2008. First, open the bonnet and start by re…
How to Replace the Front Headlamp Bulb on a Peugeot 2008
How to Replace the Front Headlamp Bulb on a Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) This brief guide outlines the steps to remove and replace the front headlamp bulb on a Peugeot 2008. First, open the bonnet of your car and start by …

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - How to disassemble the rear light of the Peugeot 2008? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos