Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How to replace the headlight bulb of Peugeot 2008

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Headlight bulb
Operation: How to replace the headlight bulb of Peugeot 2008

Let's see in this short guide the steps that will allow us to remove and replace the Peugeot 2008 front headlight bulb. First of all we open the bonnet of our car and begin to remove the plastic protective cover of the bulbs, which we find behind the headlight; then we disconnect its electrical connector and release the metal clip to remove the lamp, as shown in the video. At this point we are going to install the new bulb, of the right type and having the same attack (in this case of type H7); let's install and connect it, checking its operation!


Posted on 21 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos