Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of a Peugeot 2008

Model: Peugeot 2008 MK 2 - Years 2019-2026
Part: Body

Follow these simple and quick steps to open the bonnet of a Peugeot 2008. First, open the driver's side front door and pull the bonnet release lever located at the bottom of the door pillar (next to the pedals). Then, move to the front of the vehicle to unclip the bonnet lock, situated between the bonnet and the grille of the bumper, as shown in the video. At this point, lift the bonnet and secure it with the prop rod if present or automatically with the hydraulic struts.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the front hood of the Peugeot 2008.
How to open the front hood of the Peugeot 2008.
Peugeot 2008 (2019-2026 / MK 2) Today we will explain how to open the front hood of the new generation Peugeot 2008. Unlike other vehicles, the hood opening lever is located inside …
How to Open the Bonnet of the Peugeot 2008
How to Open the Bonnet of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) In today's tutorial, you will learn how to open the bonnet of the Peugeot 2008 by following the instructions below. First, open the driver's door and…
Opening the front hood of the Peugeot 2008 MK1.
Opening the front hood of the Peugeot 2008 MK1.
Peugeot 2008 (2013-2019 / MK 1) To access the engine compartment of the Peugeot 2008, we must first open the hood that encloses it. To do this, we open the driver's door and access …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos