Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the front hood of the Peugeot 2008.

Model: Peugeot 2008 MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

See other generations:
Video tutorial

Today we will explain how to open the front hood of the new generation Peugeot 2008. Unlike other vehicles, the hood opening lever is located inside the cabin under the passenger side glove compartment. To open the front hood, it is necessary to exit the vehicle, open the passenger door, and pull the lever.

After pulling the lever, the hood will open slightly, so it will be necessary to position yourself in front of it to insert your hand inside and open the hood completely. Closing the hood is a single step, simply let it fall closed on itself to close it.


Posted on 14 October 2025 by ScegliAuto


Related tutorials

Opening the front hood of the Peugeot 2008 MK1.
Opening the front hood of the Peugeot 2008 MK1.
Peugeot 2008 (2013-2019 / MK 1) To access the engine compartment of the Peugeot 2008, we must first open the hood that encloses it. To do this, we open the driver's door and access …
How to replace the diesel filter of the Peugeot 2008.
How to replace the diesel filter of the Peugeot 2008.
Peugeot 2008 (2019-2026 / MK 2) Replacing the diesel filter of the Peugeot 2008 is a rather simple and quick operation to perform independently. To carry out this operation, we need…
How to replace the front pole light bulb of the Peugeot 2008
How to replace the front pole light bulb of the Peugeot 2008
Peugeot 2008 (2013-2019 / MK 1) Today we will explain how to replace the front headlight bulbs of the Peugeot 2008. To replace the bulb of the right front headlight, we need to open…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos