Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Equip an Isuzu MU 7 for Day Trips

Model: Isuzu Mu 7 510 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

Video tutorial

On this Isuzu MU 7, the YouTuber did a truly professional job, creating a drawer system with a fridge and a pull-out table made in an extraordinary way. He started by removing the third-row seats, then took detailed measurements and did real planning.

He gathered all the materials he needed: lumber, tools, marine-grade carpet - which is ultra-durable - and he also added a secondary battery, a very smart choice given the fridge installation.

In this design, there is no space for a bed, but only for using the vehicle for day trips, which I would say is an even wiser choice considering the discomfort of other similar solutions.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Replace the Battery Key in the Isuzu Mu 7
How to Replace the Battery Key in the Isuzu Mu 7
Isuzu Mu 7 (2004-2013 / 510) If the key for your Isuzu Mu 7 has suddenly stopped working, don't rush to buy a new one; first, check if it was just a dead battery. Below, we will …
How to Remove the ABS Sensor from the Isuzu MU 7
How to Remove the ABS Sensor from the Isuzu MU 7
Isuzu Mu 7 (2004-2013 / 510) In this guide, see the steps to disconnect and remove the ABS sensor from the Isuzu MU 7 by following the instructions below. First, raise the vehicl…
How to Program the Keys of the Isuzu MU7 with the OBDstar Device
How to Program the Keys of the Isuzu MU7 with the OBDstar Device
Isuzu Mu 7 (2004-2013 / 510) If you have lost all the keys to your Isuzu MU7, you can reprogram the transponder using this OBDstar device. There are many types of OBDstar program…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos