Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Isuzu
    3. :
  3. Isuzu Mu X
    4. : Tail light

Isuzu Mu X - Tail light

Isuzu Mu X (2020-2024 / MK 2)
How to disassemble the rear light of the Isuzu Mu-X.
The main steps today will show us how to disassemble and replace the rear light and its bulbs of the Isuzu Mu-X. First, we open the rear door of the car and …read all…
Posted on 9 January 2024 by ScegliAuto
Isuzu Mu X (2013-2020 / MK  1, RF)
How to disassemble the rear light in the Isuzu MU-X?
In this tutorial we can see how to disassemble the rear light in the Isuzu MU-X, in order to be able to replace a broken bulb or the entire element. First of …read all…
Posted on 25 May 2023 by ScegliAuto
Isuzu Mu X (2013-2020 / MK  1, RF)
How to remove the rear light of the Isuzu Mu X
In today's video tutorial we will see how to disassemble and replace the taillight and its bulbs of the Isuzu Mu X, in simple and quick steps. First of all, we …read all…
Posted on 11 May 2024 by ScegliAuto
Car stereo (2) Battery (1) Glove box (1) Key (4) Air conditioning (1) -board computer (1) Checks and maintenance (3) Tail light (3) Air filter (1) Cabin air filter (6) Engine oil (1) Brake pads (2) Instrument cluster (2) Wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos