Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight of the Isuzu Mu-X

Model: Isuzu Mu X MK 2 - Years 2020-2026
Part: Tail light

The main steps today will show you how to remove and replace the rear headlight and its bulbs on the Isuzu Mu-X. First, open the trunk of the vehicle and start by removing the side plastic cover of the cargo area; then, unscrew the mounting screws of the headlight, which are located on the sides, and disconnect the electrical connector of the bulbs to remove it, as shown in the video. At this point, replace the stop bulbs if necessary, or the entire headlight; then install the new rear headlight and make the connection!

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of the Isuzu Mu X
How to Remove the Rear Light of the Isuzu Mu X
Isuzu Mu X (2013-2020 / MK  1, RF) In today's tutorial video, you will learn how to remove and replace the rear light and its bulbs on the Isuzu Mu X in simple and quick steps. First, …
How to Remove the Rear Headlight on an Isuzu MU-X?
How to Remove the Rear Headlight on an Isuzu MU-X?
Isuzu Mu X (2013-2020 / MK  1, RF) In this tutorial, you will see how to remove the rear headlight on an Isuzu MU-X to replace a burnt-out bulb or the entire unit. First, ensure that t…
How to Replace the Cabin Filter on an Isuzu MU-X?
How to Replace the Cabin Filter on an Isuzu MU-X?
Isuzu Mu X (2020-2026 / MK 2) To replace the cabin filter on an Isuzu MU-X, open the glove compartment located on the passenger side. To fully remove the glove compartment and acc…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos