Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of light fuses yes Iveco Daily 4

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Fuse box

While sitting in the driver's seat, look down and to your left. Fuses 12 and 13 relate to the two high beam bulbs, 42 relates to the reversing lights and 53 relates to the rear fog light, as you can see from the table in the video. The other fuse box is located in the hood, on the far left side of the vehicle. Here are the fuses relating to the low beams (14 and 15) and the one relating to the front fog lights (number 30). To find out which fuse you are looking for in an electrical fault situation, check the diagram in the video and work safely.

Posted on 31 January 2021 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Iveco Daily located?
Where is the fuse box of the Iveco Daily located?
IVECO Daily (2014-2024 / MK 5) Inside the Iveco Daily, there are two fuse boxes; today we will specifically look at the location and contents of the second fuse box, located behind…
Where are the fuses located in the 2014 Iveco Daily?
Where are the fuses located in the 2014 Iveco Daily?
IVECO Daily (2006-2020 / MK 4) The Iveco Daily vehicle produced from 2011 to 2014 has two fuse boxes inside. The first fuse box is located inside the front hood next to the battery…
Where are the fuses of the Iveco Daily located?
IVECO Daily (2006-2020 / MK 4) On the Iveco Daily, all the fuses are contained within two fuse boxes that are installed on the vehicle: on this type of vehicle, it is possible to f…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos