Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulb on the Iveco Daily

Model: IVECO Daily MK 5 - Years 2014-2026
Part: Fog lights

Let's see how to change the fog light bulb on a 2020 Iveco Daily: first of all, we need to remove the screw located inside the grille on the right side of the fog light. It is a cross screw. Then just pry the grille from the four sides, with a plastic spatula, or with a screwdriver covered with a cloth, in order not to scratch the plastics. Once the grille is removed, we see that there are three more screws to remove around the fog light. Once this is done, we can pull the headlight towards us and disconnect the electrical connector, in order to be able to change the bulb.

Posted on 24 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Iveco Daily
How to replace the cabin air filter of the Iveco Daily
IVECO Daily (2006-2020 / MK 4) The replacement of the cabin air filter of your Iveco Daily is a very important operation and for this reason it must be carried out periodically. In…
Fuse box diagram for an Iveco Daily
IVECO Daily Through this very short video tutorial, you can see the diagram of the main fuse box for an Iveco Daily, a model produced from 2000 to 2006. The diag…
Where is the OBD2 port on the Iveco Daily 2009?
Where is the OBD2 port on the Iveco Daily 2009?
IVECO Daily (2006-2020 / MK 4) If you want to access the OBD2 port located inside your Iveco Daily (2009 model), simply follow the steps described below. First, enter the vehicle a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos