Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the hood of the new Iveco Daily

Model: IVECO Daily MK 5 - Years 2014-2024
Part: Body

The guide shows how to open the hood of the new Iveco Daily. As for many cars, also for the Iveco Daily the opening of the engine compartment is carried out in two phases: the first consists in releasing the lock, while the second consists in the complete release of the lock and the locking of the hatch. The lock release lever is located in the passenger compartment, on the driver's side; it is the same as the levers found on cars and works the same way: pulling it releases the lock. Once this operation has been carried out, go to the front of the vehicle and look just under the edge of the hatch: there will be a lever that allows you to completely release the hatch. Once the hatch is opened, it must be placed in a safe position using the rod. Closing the engine compartment works like a normal car; in fact it will be enough to push the panel into position to close it.

Posted on 9 February 2023 by ScegliAuto

Video tutorial

Related tutorials

Change the timing belt on Iveco Daily 2 35-8 (8140)
Change the timing belt on Iveco Daily 2 35-8 (8140)
IVECO Daily (1989-2000 / MK 2) We see in this video the main steps to remove and replace the timing belt on the Iveco Daily 35-8 second series, from 1990, with the initials 8140. F…
Iveco Daily timing belt replacement
Iveco Daily timing belt replacement
IVECO Daily In this guide we will see the steps that will show us how to disassemble and replace the timing belt of the Iveco Daily. First of all it is necessary…
How to replace the passenger compartment air filter on an Iveco Daily
How to replace the passenger compartment air filter on an Iveco Daily
IVECO Daily (2006-2020 / MK 4) Before starting, we will have to go and open the front hood of our Iveco Daily. So let's start by disengaging and removing the top cover of the cabin…

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos