Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on an Eurocargo vehicle

Model: IVECO Eurocargo MK 5 - Years 2015-2024
Part: Service warning light

When the service light comes on in a Eurocargo vehicle, it means that a service check is needed on the vehicle and then the light needs to be reset. To reset the light, we need to turn on the instrument panel and without starting the vehicle, press the menu button on the steering wheel to access the settings. Immediately after, select the "Diagnostics" option and press the OK button. Hold down the button until the reset of the light is complete. Then, to complete the reset of the service light, we need to turn off and then restart the instrument panel.

Posted on 25 March 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the EDC light on an Iveco Eurocargo
How to reset the EDC light on an Iveco Eurocargo
IVECO Eurocargo The engine warning light on an industrial vehicle such as an Iveco Eurocargo must absolutely not be ignored. An engine failure on a heavy vehicle can…
What Does IBC Mean in Iveco Eurocargo
IVECO Eurocargo (2002-2008 / MK 1) The display located at the centre of the Iveco Eurocargo's instrument panel represents the IBC system: Iveco Body Computer. This device allows you to…
How to Replace the Bulb on an Iveco Eurocargo
How to Replace the Bulb on an Iveco Eurocargo
IVECO Eurocargo (2002-2008 / MK 1) This video explains how to remove the bulbs on an Iveco Eurocargo. Pay close attention to the process. The first step: lift the vehicle on a column l…

Other guides you may be interested in

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos