Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Ford S Max 2019

Model: Ford S Max MK 2 - Years 2016-2024
Part:

To complete the manual reset procedure for the tyre warning light on your Ford S Max second generation (2019), follow the steps below. First, start the vehicle's ignition, then use the buttons located on the left side of the steering wheel to access the vehicle settings screen. At this point, select the "Driver assist" option and then "Tyre monitor". Finally, select the "Reset" option and follow the on-screen instructions, holding down the "OK" button until the warning light reset is complete.

Posted on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Ford S-Max?
How to Reset the Tyre Pressure Warning Light on a Ford S-Max?
Ford S Max (2016-2024 / MK 2) To reset the tyre pressure warning light on a Ford S-Max, turn on the instrument panel and navigate using the arrows on the left side of the steering…
How to Reset the TPMS Light on a 2015 Ford S Max
How to Reset the TPMS Light on a 2015 Ford S Max
Ford S Max (2006-2016 / MK 1) If the TPMS light for tyre pressure appears erroneously on the dashboard of your 2015 Ford S Max and you want to reset it manually, simply follow the…
How do you reset the tire pressure warning light on the Ford S-Max?
How do you reset the tire pressure warning light on the Ford S-Max?
Ford S Max (2006-2016 / MK 1) In order to perform the tire pressure monitoring on the Ford S-Max, you need to inflate the tires until they reach the correct pressure value: this v…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos