Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light Bulb on the Ford S-MAX?

Model: Ford S Max MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part:

See other generations:
Video tutorial

In this tutorial, you will see how to replace the third brake light bulb on the Ford S-MAX, a very simple and quick operation. Before proceeding, ensure that the key is not in the ignition for safety.

Start by opening the tailgate, then unclip the panel located at the back of the light and unlock the two retaining clips. Remove it from the bodywork, extract the old bulb by turning it counterclockwise, and insert the replacement bulb, model W16W. Ideally, use an LED bulb.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulb on a Ford S-Max
How to Replace the Number Plate Bulb on a Ford S-Max
Ford S Max (2006-2016 / MK 1) Using a small flathead screwdriver, start by removing the outer cover of the bulb on your Ford S-Max. This will give you access to the blown bulb. Pr…
How to Replace the Third Brake Light Bulb on the Ford S-Max?
How to Replace the Third Brake Light Bulb on the Ford S-Max?
Ford S Max (2006-2016 / MK 1) To replace the third brake light bulb on the Ford S-Max, lift the tailgate of the boot and unclip the clips from inside the third brake light housing…
How to reset the service light on the Ford S Max
How to reset the service light on the Ford S Max
Ford S Max (2006-2016 / MK 1) Resetting the service light on a 2006 Ford S Max vehicle is a simple and quick procedure that can be done independently. The service light not only i…

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos