Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Ford S-Max?

Model: Ford S Max MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Light bulb

See other generations:
Video tutorial

To replace the front headlamp bulb on a Ford S-Max, open the bonnet and unscrew the bolts securing the headlamp at the top, using the two supports. Once the screws are loosened, you can unclip the headlamp and remove it completely after disconnecting the connector at the rear.

Once the headlamp is removed, you can open the protective cover at the back to extract the bulb, disconnect it, and replace it. After replacement, reinsert the headlamp, connect it to the connector, and secure it with the corresponding bolts.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light Bulb on the Ford S-Max?
How to Replace the Third Brake Light Bulb on the Ford S-Max?
Ford S Max (2006-2016 / MK 1) To replace the third brake light bulb on the Ford S-Max, lift the tailgate of the boot and unclip the clips from inside the third brake light housing…
How to Replace the Number Plate Bulb on a Ford S-Max
How to Replace the Number Plate Bulb on a Ford S-Max
Ford S Max (2006-2016 / MK 1) Using a small flathead screwdriver, start by removing the outer cover of the bulb on your Ford S-Max. This will give you access to the blown bulb. Pr…
Removing the Rear Light on a Ford S-Max
Removing the Rear Light on a Ford S-Max
Ford S Max (2006-2016 / MK 1) Today, you will see how to remove the rear light and replace the bulbs on a Ford S-Max by following these simple steps. First, open the boot and remo…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos