Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on a Ford S-Max

Model: Ford S Max MK 1 - Years 2006-2016
Part: Tail light

Today, you will see how to remove the rear light and replace the bulbs on a Ford S-Max by following these simple steps. First, open the boot and remove the access panel on the side of the light in question; then unscrew the plastic screw of the light to extract it outwards, as shown in the video. Now disconnect the electrical connector of the bulbs and unscrew the screws of the bulb holder to access the bulbs themselves; replace any that are not functioning and reassemble everything by applying the reverse procedure!

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light on Ford S Max
Removing the Rear Light on Ford S Max
Ford S Max (2006-2016 / MK 1) Let’s look at removing the rear light on the Ford S Max. Lift the tailgate that closes the boot, then unscrew the securing screws located at the back…
Remove the rear light of the Ford S-Max Mk2.
Remove the rear light of the Ford S-Max Mk2.
Ford S Max (2016-2024 / MK 2) The guide shows how to disassemble the rear lights of the Ford S-Max Mk2 to replace the bulbs. From the trunk, remove the plastic cover of the light …
How to Remove the Rear Bumper from a Ford S-Max
How to Remove the Rear Bumper from a Ford S-Max
Ford S Max (2006-2016 / MK 1) This guide outlines the main steps to remove and replace the rear bumper on a first generation Ford S-Max, facelift version. First, open the boot lid…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos