Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment on the Ford S-Max

Model: Ford S Max MK 1 - Years 2006-2016
Part: Glove compartment

In this brief guide, you will find instructions on how to remove the glove compartment from the dashboard of the Ford S-Max second series, following these simple steps. First, get into the vehicle and open the glove compartment; then remove the plastic side cover and unscrew the fastening screws located on the sides using a Torx screwdriver. Next, remove the lower plastic covers and completely disassemble the glove compartment; finally, reassemble everything by applying the reverse procedure for reassembly!

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter in the Ford S-MAX?
How to Replace the Cabin Filter in the Ford S-MAX?
Ford S Max (2006-2016 / MK 1) In this tutorial, see how to replace the cabin filter in the Ford S-MAX, a very simple and cost-effective operation. First, sit in the passenger seat…
Guide to Replacing the Timing Belt on the Ford S-Max
Guide to Replacing the Timing Belt on the Ford S-Max
Ford S Max (2016-2024 / MK 2) Today's main instructions will show you how to dismantle and replace the timing belt on the Ford S-Max. First, open the bonnet of the vehicle and sta…
Removing the Rear Bumper of a Ford S Max
Removing the Rear Bumper of a Ford S Max
Ford S Max (2006-2016 / MK 1) How to remove the rear bumper of a Ford S Max? This guide shows the removal process. First, using a screwdriver or battery-powered screwdriver, unscr…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos