Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. S Max
    4. : Remove the rear bumper of a Ford S Max

Ford S Max - Video tutorial

Model: Ford S Max MK 1 - Years 2006-2016
Part: Rear bumper
Operation: Remove the rear bumper of a Ford S Max

How to remove the rear bumper of a Ford S Max? Let's see the disassembly of the bumper. First of all, with a screwdriver or cordless screwdriver we unscrew the tightening screws placed in the bumper (under the rear lights). We unscrew the screws located in the lower part of the bumper, then remove the screws placed on the sides of the car's stone guards. We remove the stone guards (if necessary we remove the wheels). Once the bumper is free from any screw or pin, grab it with your hands and pull it away from the bodywork (disconnect the power cables of the lights and parking sensors).


Posted on 26 November 2023 by ScegliAuto

Other guides that may interest you

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos