Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Parking Sensors on the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Parking sensors

This guide will show you how to dismantle and replace the parking sensors on the Ford Focus in simple and quick steps. First, move to the front of the vehicle and start by unfastening and removing the sensor on the rear of the front bumper, then disconnect its electrical connector; next, replace and install the new parking sensor, as well as the original one. Similarly, replace any other parking sensors (including the rear ones) if necessary; finally, test their functionality during parking manoeuvres.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuses on Ford Focus?
Where are the Fuses on Ford Focus?
Ford Focus (2011-2018 / MK 3) To manage the operation of the devices installed on the Ford Focus, you can locate the fuse boxes present on the vehicle: there are three in this typ…
Where Are the Impact Sensors Located on a Ford Focus?
Where Are the Impact Sensors Located on a Ford Focus?
Ford Focus (2011-2018 / MK 3) In this video, you can see where the impact sensors are located on a Ford Focus and how to proceed if you need to replace them, a very simple and qui…
Reset of the tire pressure warning light on the Ford Focus
Reset of the tire pressure warning light on the Ford Focus
Ford Focus (2011-2018 / MK 3) Let's discover the steps that will allow us to reset the tire pressure warning light on the Ford Focus; before performing the reset of the TPMS senso…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos