Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Front bumper

Today, we will go through the necessary instructions to remove and replace the front bumper on a Ford Focus, following these simple steps. First, open the bonnet of the vehicle and start unscrewing the fastening screws and clips found both at the top and bottom of the front bumper; then unscrew the additional screws located on both sides of the front wheel arches, as shown in the video. At this point, gently unclip the bumper from the sides until it is completely removed; apply the reverse procedure for reattaching the bumper!

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
How to Replace the Front Bumper on a Ford Focus?
How to Replace the Front Bumper on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) In this tutorial, you will see how to remove the front bumper on a Ford Focus. First, open the bonnet. Then, undo all the fastening screws located on…
How to Remove the Front Bumper from the Ford Focus MK4
How to Remove the Front Bumper from the Ford Focus MK4
Ford Focus (2018-2025 / MK 4) In today's video, you will see how to remove the front bumper from the fourth series Ford Focus, from 2019, following the instructions below. First, …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos