Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on the Ford Focus ST MK3

Model: Ford Focus MK 3 - Years 2011-2018
Part: Front bumper

In today's video tutorial, we will see the main instructions for removing the front bumper and a new intercooler kit on the third generation Ford Focus ST. First, open the bonnet and start removing the lower shield of the front bumper using a Torx screwdriver to unscrew the screws; then remove the additional screws present on both sides of the front wheel arches, as illustrated in the video. At this point, unclip the upper plastic clips and remove the headlights by disconnecting the electrical cables; finally, gently remove the bumper, following the video to the end for the installation of the intercooler kit!

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper on a Ford Focus MK3
Removing the Front Bumper on a Ford Focus MK3
Ford Focus (2011-2018 / MK 3) In today's tutorial video, we will cover the main instructions for removing the front bumper from a Ford Focus MK3. First, remove the lower engine co…
How to Remove the Front Bumper Grille on a Ford Focus
How to Remove the Front Bumper Grille on a Ford Focus
Ford Focus (2011-2018 / MK 3) Want to replace the central air grille on your vehicle? Here’s how to remove the front bumper grille on a Ford Focus: using a plastic lever or screwd…
How to Replace the Front Bumper on a Ford Focus
How to Replace the Front Bumper on a Ford Focus
Ford Focus (2011-2018 / MK 3) Today, we will go through the necessary instructions to remove and replace the front bumper on a Ford Focus, following these simple steps. First, ope…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos