Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Removing the front bumper on Ford Focus MK3

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Front bumper
Operation: Removing the front bumper on Ford Focus MK3

In today's video tutorial we will see the main instructions for disassembling the front bumper on a Ford Focus MK3. First we are going to remove the lower motor protection, by unscrewing the fixing screws; then we also unscrew the screws that we find under the front bumper, as shown in the video. At this point we open the bonnet and with a torx wrench we unscrew all the upper screws of the bumper; we also unscrew the screws of the front lights to remove them, disconnecting the electrical connector on the back. We just have to unscrew the screws of the wheel arches to remove the bumper!


Posted on 13 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos