Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. S Max
    4. : Rear bumper

Ford S Max - Rear bumper

Rear Bumper Ford S Max (2006-2016 / mk 1)

Ford S Max (2006-2016 / MK 1)
How to Remove the Rear Bumper from a Ford S-Max
This guide outlines the main steps to remove and replace the rear bumper on a first generation Ford S-Max, facelift version. First, open the boot lid and start …Read all…
Posted on 9 August 2026 by ScegliAuto
Ford S Max (2006-2016 / MK 1)
Removing the Rear Bumper of a Ford S Max
How to remove the rear bumper of a Ford S Max? This guide shows the removal process. First, using a screwdriver or battery-powered screwdriver, unscrew the …Read all…
Posted on 4 April 2026 by ScegliAuto
Airbag (1) Car stereo (4) Battery (7) Glove compartment (1) Key (4) Timing belt (8) V-belt (2) Air conditioner (1) Onboard computer (2) Checks and maintenance (3) Dashboard (1) Shifter boot (1) Tail light (3) Air filter (2) Cabin air filter (4) Fuel filter (1) Diesel fuel filter (4) Oil filter (3) Light bulb (2) Headlight bulb (1) Tail light bulb (1) License plate light (1) (1) Starter motor (3) Door trim panel (3) Rear bumper (2) Brake pads (2) Tires (1) Shift knob (2) Pump (1) Instrument cluster (2) Fuse box (12) Seat (1) Side mirror (6) Rearview mirror (1) Warning light – error code (3) (3) Tire pressure warning light (2) Service warning light (35) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos