Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper from a Ford S-Max

Model: Ford S Max MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Rear bumper

See other generations:
Video tutorial

This guide outlines the main steps to remove and replace the rear bumper on a first generation Ford S-Max, facelift version. First, open the boot lid and start by unscrewing all the fastening screws located above the bumper, removing the plastic caps.

Then, unscrew the screws found on both sides of the wheel arches, as illustrated in the video. At this point, gently unclip the bumper from the sides; disconnect the rear wiring and then unclip and remove the rear bumper completely!


Updated on 6 June 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper of a Ford S Max
Removing the Rear Bumper of a Ford S Max
Ford S Max (2006-2016 / MK 1) How to remove the rear bumper of a Ford S Max? This guide shows the removal process. First, using a screwdriver or battery-powered screwdriver, unscr…
Replacing the Timing Belt on a Ford S-Max 2.0 TDCI
Replacing the Timing Belt on a Ford S-Max 2.0 TDCI
Ford S Max (2006-2016 / MK 1) This guide provides the main instructions for removing and replacing the timing belt on a Ford S-Max 2.0 TDCI, with the engine removed. First, remove…
How to replace the internal rear-view mirror on the Ford S-Max?
How to replace the internal rear-view mirror on the Ford S-Max?
Ford S Max (2006-2016 / MK 1) To replace the internal rear-view mirror on the Ford S-Max, detach the plastic cover from the lower part of the mirror support: this will allow you t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos