Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on a Ford S-Max 2.0 TDCI

Model: Ford S Max MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

This guide provides the main instructions for removing and replacing the timing belt on a Ford S-Max 2.0 TDCI, with the engine removed. First, remove the engine mount on the timing belt side to access the timing cover (unscrew the bolts); then remove the serpentine belt and subsequently take off the crankshaft pulley.

At this point, take the necessary references for the removal and replacement of the timing belt, following the video tutorial to the end!


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on the Ford S-Max 2.0 TDCI
How to Replace the Timing Belt on the Ford S-Max 2.0 TDCI
Ford S Max (2006-2016 / MK 1) .. remove and replace the timing belt on the Ford S-Max 2.0 TDCI. First, lift the vehicle and start by removing the front right wheel, then remove the wheel.. …
Guide to Replacing the Timing Belt on the Ford S-Max
Guide to Replacing the Timing Belt on the Ford S-Max
Ford S Max (2016-2024 / MK 2) Today's main instructions will show you how to dismantle and replace the timing belt on the Ford S-Max. First, open the bonnet of the vehicle and sta…
How to Replace the Timing Belt on a Ford S-Max?
How to Replace the Timing Belt on a Ford S-Max?
Ford S Max (2006-2016 / MK 1) To replace the timing belt on a Ford S-Max, open the bonnet to access the components inside the engine compartment. On the left side of the engine bl…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos