Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Ford S-Max

Model: Ford S Max MK 2 - Years 2016-2024
Part: Timing belt

Today's main instructions will show you how to dismantle and replace the timing belt on the Ford S-Max. First, open the bonnet of the vehicle and start by removing the engine mount; then lift the vehicle and remove the front right wheel, taking out the wheel arch liner and subsequently disconnecting the serpentine belt, as shown in the video. At this point, remove the crankshaft pulley and the timing cover, replacing and installing the new original timing belt; perform the timing and reassemble!

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on a Ford S-Max 2.0 TDCI
Replacing the Timing Belt on a Ford S-Max 2.0 TDCI
Ford S Max (2006-2016 / MK 1) This guide provides the main instructions for removing and replacing the timing belt on a Ford S-Max 2.0 TDCI, with the engine removed. First, remove…
How to Replace the Timing Belt on the Ford S-Max 2.0 TDCI
How to Replace the Timing Belt on the Ford S-Max 2.0 TDCI
Ford S Max (2006-2016 / MK 1) Today's guide will show you how to remove and replace the timing belt on the Ford S-Max 2.0 TDCI. First, lift the vehicle and start by removing the f…
How to Replace the Timing Belt on Ford S-Max
How to Replace the Timing Belt on Ford S-Max
Ford S Max (2006-2016 / MK 1) Lift the car on a column lift or jack, remove the front wheel and the right wheel arch liner using a screwdriver. Once these operations are complete,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos