Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Ford S-Max 2.0 TDCI

Model: Ford S Max MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

Today's guide will show you how to remove and replace the timing belt on the Ford S-Max 2.0 TDCI. First, lift the vehicle and start by removing the front right wheel, then remove the wheel arch liner. Disconnect the auxiliary belt and remove the crankshaft pulley by unscrewing the screws of the timing cover to access it, as shown in the video.

Now, open the bonnet and remove the fuel filter and engine mount using a socket wrench. Take the necessary references to remove and replace the timing belt, following the steps indicated in the video!


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Ford S-Max 2.0 TDCI
Replacing the Timing Belt on a Ford S-Max 2.0 TDCI
Ford S Max (2006-2016 / MK 1) .. and replacing the timing belt on a Ford S-Max 2.0 TDCI, with the engine removed. First, remove the engine mount on the timing belt side to access.. …
Guide to Replacing the Timing Belt on the Ford S-Max
Guide to Replacing the Timing Belt on the Ford S-Max
Ford S Max (2016-2024 / MK 2) Today's main instructions will show you how to dismantle and replace the timing belt on the Ford S-Max. First, open the bonnet of the vehicle and sta…
How to Replace the Timing Belt on Ford S-Max
How to Replace the Timing Belt on Ford S-Max
Ford S Max (2006-2016 / MK 1) Lift the car on a column lift or jack, remove the front wheel and the right wheel arch liner using a screwdriver. Once these operations are complete,…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos