Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. S Max
    4. : Starter motor

Ford S Max - Starter motor

Starter Motor Ford S Max (2006-2016 / mk 1)

Ford S Max (2006-2016 / MK 1)
How to replace the starter motor on the Ford S-Max?
To replace the starter motor on the Ford S-Max, open the bonnet to access the components within the engine bay: you will need to remove the cover from the top …Read all…
Posted on 13 September 2026 by ScegliAuto
Ford S Max (2006-2016 / MK 1)
How to Replace the Starter Motor on the Ford S-Max?
To replace the starter motor on the Ford S-Max, it is necessary to lift the car using a ramp or a jack. This will allow you to loosen the bolts securing the …Read all…
Posted on 17 July 2026 by ScegliAuto
Ford S Max (2006-2016 / MK 1)
How to Remove the Starter Motor on a Ford S-Max
If the starter motor does not activate when turning the key to the ignition position, it is possible that the excitation relay of the solenoid, which moves and …Read all…
Posted on 5 March 2026 by ScegliAuto
Airbag (1) Car stereo (4) Battery (7) Glove compartment (1) Key (4) Timing belt (8) V-belt (2) Air conditioner (1) Onboard computer (2) Checks and maintenance (3) Dashboard (1) Shifter boot (1) Tail light (3) Air filter (2) Cabin air filter (4) Fuel filter (1) Diesel fuel filter (4) Oil filter (3) Light bulb (2) Headlight bulb (1) Tail light bulb (1) License plate light (1) (1) Starter motor (3) Door trim panel (3) Rear bumper (2) Brake pads (2) Tires (1) Shift knob (2) Pump (1) Instrument cluster (2) Fuse box (12) Seat (1) Side mirror (6) Rearview mirror (1) Warning light – error code (3) (3) Tire pressure warning light (2) Service warning light (35) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos