Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Starter Motor on a Ford S-Max

Model: Ford S Max MK 1 - Years 2006-2016
Part: Starter motor

If the starter motor does not activate when turning the key to the ignition position, it is possible that the excitation relay of the solenoid, which moves and rotates the pinion that engages the flywheel, may be damaged, or more simply, the pinion itself may be seized, or the brushes of the starter motor may be worn out. To remove the starter motor, first disconnect the battery, then work from underneath the engine: after removing the splash shield, you can easily access the starter motor and proceed with its removal.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford S Max (2006-2016 / MK 1) To replace the starter motor on the Ford S-Max, open the bonnet to access the components within the engine bay: you will need to remove the cover fro…
Ford S Max (2016-2024 / MK 2) To change the battery in a Ford S-Max, open the bonnet and secure it with the prop rod. Start by unscrewing the screws that secure the brake fluid re…
Ford S Max (2006-2016 / MK 1) To replace the starter motor on the Ford S-Max, it is necessary to lift the car using a ramp or a jack. This will allow you to loosen the bolts secur…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos